Currently browsing: Items authored or edited by Amir Shirzadi https://orcid.org/0000-0002-2897-139X

Dey, Avishek; Chandrabose, Gauthaman; Damptey, Lois A.O.; Erakulan, E.S.; Thapa, Ranjit; Zhuk, Siarhei; Dalapati, Goutam Kumar; Ramakrishna, Seeram; Braithwaite, Nicholas St. J.; Shirzadi, Amir and Krishnamurthy, Satheesh (2021). Cu₂O/CuO heterojunction catalysts through atmospheric pressure plasma induced defect passivation. Applied Surface Science, 541, article no. 148571.

• Download Accepted Manuscript (PDF / 2MB)

Dai, H.; Mark, A. F.; Moat, R.; Shirzadi, A. A.; Bhadeshia, H. K. D. H.; Karlsson, L. and Withers, P. J. (2010). Modelling of residual stress minimization through martensitic transformation in stainless steel welds. In: 9th International Seminar on ‘Numerical analysis of weldability’, 28-30 Sep 2009, Graz, Austria,.

• Download Accepted Manuscript (PDF / 421kB)

Hu, F.; Wu, K. M.; Wan, X. L.; Rodionova, I.; Shirzadi, A. A. and Zhang, F. C. (2017). Novel method for refinement of retained austenite in micro/nano-structured bainitic steels. Materials Science and Technology, 33(11) pp. 1360–1365.

• Download Accepted Manuscript (PDF / 3MB)

Huang, G.; Wan, X. L.; Wu, K. M.; Isayev, O.; Hress, O.; Rodionova, I. and Shirzadi, A. A. (2016). Effect of Cu addition on microstructure and impact toughness in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels. Materials Science and Technology, 33(5) pp. 602–614.

• Download Accepted Manuscript (PDF / 12MB)

Hu, Feng; Wu, Kaiming; Hou, Tingping and Shirzadi, Amir Abbas (2014). Effect of Tempering Temperature on the Microstructure and Hardness of a Super-bainitic Steel Containing Co and Al. ISIJ International, 54(4) pp. 926–931.

• Download Published Version (PDF / 1MB)

Hu, Feng; Wu, Kaiming; Hodgson, Peter Damian and Shirzadi, Amir Abbas (2014). Refinement of retained austenite in super-bainitic steel by a deep cryogenic treatment. ISIJ International, 54(1) pp. 222–226.

• Download Published Version (PDF / 1MB)

Hu, Feng; Wu, Kaiming; Hou, Tingping and Shirzadi, Amir A. (2013). Tempering stability of retained austenite in nanostructured dual-phase steels. Materials Science and Technology, 29(8) pp. 947–953.

• Download Accepted Manuscript (PDF / 2MB)

Hu, F.; Wu, K. M. and Shirzadi, A. A. (2012). Influence of Co and Al on pearlitic transformation in superbainitic steels. Ironmaking & Steelmaking, 39(7) pp. 535–539.

• Download Accepted Manuscript (PDF / 4MB)

Karlsson, L.; Mráz, L.; Bhadeshia, H. K. D. H and Shirzadi, A. A. (2010). Comparison of alloying concepts for Low Transformation Temperature (LTT) welding consumables. In: Advanced Welding Technologies, 19-21 Oct 2010, Sosnowiec, Poland.

• Download Accepted Manuscript (PDF / 4MB)

Li, Shichun; Limbach, René; Longley, Louis; Shirzadi, Amir A.; Walmsley, John C.; Johnstone, Duncan N.; Midgley, Paul A.; Wondraczek, Lothar and Bennett, Thomas D. (2019). Mechanical Properties and Processing Techniques of Bulk Metal–Organic Framework Glasses. Journal of the American Chemical Society, 141(2) pp. 1027–1034.

• Download Accepted Manuscript (PDF / 1MB)

Li, Y.; Wan, X. L.; Lu, W. Y.; Shirzadi, A. A.; Isayev, O.; Hress, O. and Wu, K. M. (2016). Effect of Zr-Ti combined deoxidation on the microstructure and mechanical properties of high-strength low-alloy steels. Materials Science and Engineering: A, 659 pp. 179–187.

• Download Accepted Manuscript (PDF / 1MB)

Laik, A.; Shirzadi, A. A.; Sharma, G.; Tewari, R.; Jayakumar, T. and Dey, G. K. (2015). Microstructure and Interfacial Reactions During Vacuum Brazing of Stainless Steel to Titanium Using Ag-28 pct Cu Alloy. Metallurgical and Materials Transactions A, 46(2) pp. 771–782.

• Download Published Version (PDF / 11MB)

Lei, X. W.; Wang, H. H.; Wu, K. M.; Shirzadi, A. A.; Yin, Y. Q. and Wu, N. C. (2014). In situ observation of bainite to austenite transformation of microalloyed high strength steel during simulated welding cycle. Science and Technology of Welding and Joining, 19(5) pp. 402–407.

• Download Accepted Manuscript (PDF / 3MB)

Laik, A.; Shirzadi, A. A.; Tewari, R. and Kumar, Anish (2013). Microstructure and interfacial reactions during active metal brazing of stainless steel to titanium. Metallurgical and Materials Transactions A, 44(5) pp. 2212–2225.

• Download Published Version (PDF / 2MB)

Lelito, J.; Zak, P. L.; Greer, A. L.; Suchy, J. S.; Krajewski, W. K.; Gracz, B.; Szucki, M. and Shirzadi, A. A. (2012). Crystallization model of magnesium primary phase in the AZ91/SiC composite. Composites Part B: Engineering, 43(8) pp. 3306–3309.

• Download Accepted Manuscript (PDF / 1MB)

Lelito, Janusz; Zak, Pawel L.; Shirzadi, Amir A.; Greer, A. Lindsay; Krajewski, Witold K.; Suchy, Jozef S.; Haberl, Katharina and Schumacher, Peter (2012). Effect of SiC reinforcement particles on the grain density in a magnesium-based metal-matrix composite: modelling and experiment. Acta Materialia, 60(6-7) pp. 2950–2958.

• Download Accepted Manuscript (PDF / 1MB)

Moat, R. J.; Ooi, S.; Shirzadi, A. A.; Dai, H.; Mark, A. F.; Bhadeshia, H. K. D. H. and Withers, P. J. (2018). Residual stress control of multipass welds using low transformation temperature fillers. Materials Science and Technology, 34(5) pp. 519–528.

• Download Accepted Manuscript (PDF / 3MB)

Moat, R. J.; Stone, H. J.; Shirzadi, A. A.; Francis, J. A.; Kundu, S.; Mark, A. F.; Bhadeshia, H. K. D. H.; Karlsson, L. and Withers, P. J. (2011). Design of weld fillers for mitigation of residual stresses in ferritic and austenitic steel welds. Science and Technology of Welding & Joining, 16(3) pp. 279–284.

• Download Accepted Manuscript (PDF / 3MB)

Ooi, Steve; Shirzadi, Amir and Yang, Jianguo (2015). Austenite memory and variant selection in a novel martensitic welding alloy. In: Materials Today: Proceedings, Elsevier Ltd., 2(Suppl. 2) S325-S331.

• Download Published Version (PDF / 741kB)

Prikhodko, Sergey V.; Savvakin, Dmytro G.; Markovsky, Pavlo E.; Stasuk, Olexander O.; Penney, James; Shirzadi, Amir A.; Davies, Peter D. and Davies, Helen M. (2020). Diffusion bonding of TiC or TiB reinforced Ti–6Al–4V matrix composites to conventional Ti–6Al–4V alloy. Science and Technology of Welding and Joining, 25(6) pp. 518–524.

• Download Accepted Manuscript (PDF / 2MB)

Prikhodko, SV; Savvakin, DG; Markovsky, PE; Stasiuk, OO; Enzinger, N; Deley, F; Flipo, B; Shirzadi, AA; Davies, HM; Davies, PD; Penny, J; Bozhilov, K and Ivasishin, OM (2019). Layered Structures of Ti-6Al-4V Alloy and Metal Matrix Composites on Its Base Joint by Diffusion Bonding and Friction Welding. Microscopy and Microanalysis, 25(S2) pp. 812–813.

• Download Published Version (PDF / 1MB)

Peet, M.J. and Shirzadi, Amir (2010). Neural network modelling of hot deformation of austenite. In: 6th International Conference on Physical and Numerical Simulation of Materials Processing, 16-19 Nov 2010, Guilin, China.

• Download Accepted Manuscript (PDF / 1MB)

Ruan, L. H.; Wu, K. M.; Qiu, J. A.; Shirzadi, A. A. and Rodionova, I. G. (2017). Effect of Silicon Content on Carbide Precipitation and Low-Temperature Toughness of Pressure Vessel Steels. Metal Science and Heat Treatment, 59(1-2) pp. 97–101.

• Download Accepted Manuscript (PDF / 837kB)

Shirzadi, Amir A. (2024). Applications of solid-state diffusion bonding. Welding and Joining Matters pp. 21–22.

• Download Published Version (PDF / 429kB)

Shirzadi, Amir A. (2024). Fundamentals of solid-state diffusion bonding. Welding and Joining Matters(9) pp. 13–15.

• Download Published Version (PDF / 572kB)

Shirzadi, Amir A.; Zhang, Chengcong; Mughal, Muhammad Zeeshan and Xia, Peiyun (2022). Challenges and Latest Developments in Diffusion Bonding of High-Magnesium Aluminium Alloy (Al-5056/Al-5A06) to Stainless Steels. Metals, 12(7), article no. e1193.

• Download Published Version (PDF / 8MB)

Shirzadi, A. A.; Kozieł, T.; Cios, G. and Bała, P. (2019). Development of Auto Ejection Melt Spinning (AEMS) and its application in fabrication of cobalt-based ribbons. Journal of Materials Processing Technology pp. 377–381.

• Download Published Version (PDF / 2MB)

Shirzadi, Amir A. (2019). Modelling and design of new stainless-steel welding alloys suitable for low-deformation repairs and restoration processes. Procedia Manufacturing, 37 pp. 627–632.

• Download Published Version (PDF / 862kB)

Shirzadi, Amir A.; Laik, Arijit; Tewari, Raghvendra; Orsborn, Jonathan and Dey, Gautam K. (2018). Gallium-assisted diffusion bonding of stainless steel to titanium; microstructural evolution and bond strength. Materialia, 4 pp. 115–126.

• Download Published Version (PDF / 9MB)

Shirzadi, Amir and Jackson, Susan eds. (2014). Structural Alloys for Power Plants: Operational Challenges and High-Temperature Materials. Elsevier Ltd..

Shirzadi, A. A.; Abreu, H.; Cayron, C. and Ubhi, S. (2011). Combined effect of stress and strain on crystallographic orientation of bainite. Ironmaking & Steelmaking, 38(7) pp. 519–524.

• Download Accepted Manuscript (PDF / 1MB)

Shirzadi, A. A. and Bhadeshia, H. K. D. H. (2010). Accumulation of stress in constrained assemblies: novel Satoh test configuration. Science and Technology of Welding & Joining, 15(6) pp. 497–499.

• Download Published Version (PDF / 187kB)

Shirzadi, A. A.; Bhadeshia, H. K. D. H.; Karlsson, L. and Withers, P. J. (2009). Stainless steel weld metal designed to mitigate residual stresses. Science and Technology of Welding & Joining, 14(6) pp. 559–565.

• Download Published Version (PDF / 570kB)

Shirzadi, A. A.; Abreu, H.; Pocock, L.; Klobčar, D.; Withers, P. J. and Bhadeshia, H. K. D. H. (2009). Bainite orientation in plastically deformed austenite. International Journal of Materials Research, 100(1) pp. 40–45.

Shirzadi, A. A.; Zhu, Y. and Bhadeshia, H. K. D. H. (2008). Joining ceramics to metals using metallic foam. Materials Science and Engineering: A, 496(1-2) pp. 501–506.

• Download Accepted Manuscript (PDF / 3MB)

Terasaki, Nobuyuki; Ohashi, Touyou; Nagatomo, Yoshiyuki; Kuromitsu, Yoshirou and Shirzadi, Amir A. (2019). A new method for liquid-phase bonding of copper plates to aluminum nitride (AlN) substrates used in high-power modules. Journal of Materials Science: Materials in Electronics, 30(7) pp. 6552–6555.

• Download Accepted Manuscript (PDF / 366kB)

Wang, Wei; Zhang, Ruiqiang; Shirzadi, Amir A.; Balint, Daniel S; Aucott, Lee and Jiang, Jun (2024). Thermal cracking: clarifying the effects of phases, voids and grains through characterisation and crystal plasticity modelling. Journal of the Mechanics and Physics of Solids, 186, article no. 105600.

• Download Published Version (PDF / 12MB)

Wang, Wei; Balint, Daniel S; Shirzadi, Amir A; Wang, Yaping; Lee, Junyi; Aucott, Lee and Jiang, Jun (2023). Imparted benefits on mechanical properties by achieving grain boundary migration across voids. Acta Materialia, 256, article no. 119103.

• Download Published Version (PDF / 17MB)

Zhang, Chencong and Shirzadi, Amir A. (2021). Fail-Safe Joints between Copper Alloy (C18150) and Nickel-Based Superalloy (GH4169) Made by Transient Liquid Phase (TLP) Bonding and Using Boron-Nickel (BNi-2) Interlayer. Metals, 11(10), article no. 1504.

• Download Published Version (PDF / 3MB)

Zhang, Chengcong; Cao, Juyong and Shirzadi, Amir A. (2021). Refill Friction Stir Spot Welding (Refill FSSW) of magnesium lithium alloys: effects of air and argon cooling. Science and Technology of Welding and Joining, 26(3) pp. 236–243.

• Download Accepted Manuscript (PDF / 1MB)

Zhang, Chengcong and Shirzadi, Amir A. (2021). Diffusion bonding of copper alloy to nickel-based superalloy: effect of heat treatment on the microstructure and mechanical properties of the joints. Science and Technology of Welding and Joining, 26(3) pp. 213–219.

• Download Accepted Manuscript (PDF / 1MB)

Zhang, Chengcong and Shirzadi, Amir A. (2018). Measurement of residual stresses in dissimilar friction stir-welded aluminium and copper plates using the contour method. Science and Technology of Welding and Joining, 23(5) pp. 394–399.

• Download Accepted Manuscript (PDF / 8MB)